LS – BA66E
Ball valve lockout – Single leg (Cover only)
with closed back and Front extension, 7 locking holes – A/E type
fits on valve sizes 9.5mm to 31.5mm (3/8″ to 1¼” OR 0.37″ to 1.25″)
Accepts shackle upto 7.5mm
LS – BA66E
Ball valve lockout – Single leg (Cover only)
with closed back and Front extension, 7 locking holes – A/E type
fits on valve sizes 9.5mm to 31.5mm (3/8″ to 1¼” OR 0.37″ to 1.25″)
Accepts shackle upto 7.5mm
Detail
• Material : Polypropylene
• Available in four different sizes with / without extension to lockout numerous ball valves.
• Locking holes : 7 / 6 / 5 numbers.
• Accepts shackle maximum up to : 9mm
• Advantage:
This device is fully dielectric device that is very efficient, inexpensive and safe, also highly resistant to solvent and other
chemical products, resist cracking, abrasion and higher temperature changes, this device is used to lockout the movement of lever
for ball valve either in open or closed position, It can lockout the pipes with big diameter range as well as small diameter range
Product Application
- When & Where should use LOTO?
- Daily maintenance, adjustment, cleaning, inspection and commissioning for equipment. Enter into the limited space, hot work, dismantling work and so on in the tower, tank, electrified body, kettle, heat exchanger, pumps and other facilities.
- Operation involving high voltage. ( including the operation under the high-tension cable )
- Operation require closing the safety system temporary.
- Operation during maintenance and commissioning of non-processing.
